Blade II

BLADE II is high performance wingsuit that is set-up for multiple purposes. We have worked hard to satisfy the needs of todays experienced wingsuit pilots.

The new leg wing which is wider and longer than before gives the pilot controllable power for a maximum glide and speed. The suit is well balanced and it’s range well under controlled by the pilot.

New, higher profile back deflector and semi rigid leading edge helps out to create that extra lift and with new air-locks the wings seem almost rigid, giving the pilot a maximum feeling of control and feel of the flight. To balance out the flight experience we have used the large arm wings for the best high lift flight, without compromising the access to BOC. The wingsuit has a short wing “cut-away” system located on the side of the suit in case of emergency.

Tech specs

Model: 2010
Nr. of inflatable areas:
4
Glide ratio:
Up to 3,3 : 1
Main material:
100% Polyamide

  • New over the shoulder 6-mm quick zip attachment makes assembly faster and simpler.
  • Large arm wings that maximizes the surface wing area without compromising access to BOC pilot chute.
  • New longer and wider leg wing to boast the forward speed and stability for high performance flight.
  • Semi-rigid arm wing leading edge made from 5 mm foam and either from sturdy Kite280FX see-through fabric or regular Parapack at a color of your choice.
  • New air inlet technology for solid, high pressurization.
  • New air-lock technology for wing rigidity.
  • New thicker back deflector profile to optimize lift at more aggressive flight angle.
  • New Jimmy Pilot Chute Pouch. Developed by Jimmy Pouchert from APEX BASE. (Extra option)
  • New short wing “cut-away” with loop handles and cover flap located at the hip area.
  • Semi-rigid wingtip gripper with pockets for a good grip.
  • Semi-rigid plastic ribs inside all wings.
  • Bi-Convex wing profile on all trailing edges. Decreases drag and makes the wing faster through the airstream generating extra speed and lift.
  • Deep cut booties with reinforcement made from premium leather.
  • 5 mm thick foam lining on arm sleeves and knee area.
  • High collar.
  • Two inside pockets.
  • Snaps to hold wing up for walking mode.

Custom made for experienced skydivers and B.A.S.E.- jumpers only.